UNV
FAQ
Back
How to set System Time & DST?
2019.06.04

Answer:

Manually Setting or Synchronizing the System Time

1. Click Setup > Common > Time, and then click the Time tab.

2. Select a synchronization mode.

3. Set the correct time zone and system time. You may also click Sync with Computer Time to synchronize the time settings of your camera with that of your PC.

4. Click Save.

Synchronizing with the NTP Server

1. Click Setup > Common > Time, and then click the Time tab.

2. Set Sync Mode to Sync with NTP Server, and then set the IP address and port of the NTP server and update interval.

3. Click Save. The camera will periodically synchronize time with the NTP server.

Setting the DST

1. Click Setup > Common > Time, and then click the DST tab.

2. Select On for DST, set the start time, end time, and DST bias.

3. Click Save.

 

TAGS:
Time setup, common setting, system time, time sync, time zone, NTP server, DST, DST bias