Özellikler Özellikleri ebat

Built-in 6kW on&off-grid inverter to power multiple different household appliances at the same time.

High-performance 10.24kWh lithium-iron phosphate (LiFePO4) battery, safe, reliable, and long lifespan (up to 6,000 cycles).

Supports off-grid operation, can seamlessly switch between on/off-grid mode in backup mode to supply power without interruption.

Integrated design, simple and stylish appearance, easy to transport and install.

Multiple indicators show at-a-glance system status.

Built-in Wi-Fi module allows remote system monitoring through a mobile app, achieving 24-hour automatic energy management and real-time update.

Multiple modes available for user to choose for maximum system utilization in different scenarios.

Ultra-wide photovoltaic input voltage range (60~550V), up to 23A input current, compatible with different photovoltaic arrays. Max 9000W input power, which is 1.5times of the rated DC output power.

Two independent MPPT inputs meet different installation scenarios in households.

Fanless integrated and efficient heat dissipation technology allows a quieter environment and longer lifespan of system components.

Integral cabinet, reinforced protection plate for battery compartment, IP65 ingress protection.

BMS intelligent battery management system safeguards battery with integrated protections such as overvoltage protection, over-discharge protection, overcurrent protection, short-circuit protection, high temperature protection, low temperature protection, etc.

Supports cold startup.

Inverter’s conversion efficiency up to 97.6%.

Multiple inverter protections: DC insulation resistance monitoring, residual current monitoring, anti-islanding protection, input reverse polarity protection, AC overcurrent protection, AC short-circuit protection, AC overvoltage protection.

5-year warranty, CE, UN38.3, IEC62619,CEI0-21 certificates.

PV input parametersDescription
Max input power9000W
MPPT voltage range60V to 550V
Rated input current16A per input
Max input current23A per input
Number of MPP trackers2
On-grid output parametersDescription
Rated on-grid output apparent power6000VA
Max on-grid input apparent power10000VA
Rated output voltage230V AC, 50/60Hz
Max on-grid output current27.3A
Power factor~1 (0.8, leading/lagging, adjustable)
Total harmonic distortion (THD)<3%
Off-grid output parametersDescription
Rated off-grid output apparent power6000VA
Max output current27.3A
Rated output voltage230 VAC
Rated output frequency50 /60 Hz
Total harmonic distortion (THD)<3%
Max efficiency97.6%
Operating temperature-25°C to 60°C
Operating humidity0% to 95% (RH)
CoolingNatural convection
DisplayLED indicator, app
BMS communicationRS485, CAN
Wireless communicationWi-Fi
Ingress protectionIP65
Basic parametersDescription
Rated energy10.24kWh
CellLithium iron phosphate
Nominal voltage51.2 VDC (25°C ±2°C)
Battery self-discharge rate≤3.5%/month (25°C, 40% SOC)
Cycle life≥6000 (0.5C/0.5C, 70% EOL)
≥3500 (0.5C/0.5C, 80% EOL)
Rated capacity200Ah
Nominal discharge current100A
Max continuous discharge current100A
Nominal charge current100A
Max continuous charge current100A
Internal impedance> 100mΩ
IP levelIP65
Max withstand voltage1500 VDC
Operating temperatureCharge: 0°C to 55°C
Discharge: -20°C to 55°C
Storage temperature-30°C to 60°C
Storage humidity5% to 95% (RH)
Basic parametersDescription
Dimensions1320mm (H) * 700mm (W) * 212mm (D)
Ingress protectionIP65
Operating environmentDescription
Operating temperatureCharge: 0°C to 55°C
Discharge: -20°C to 55°C
Operating humidity5% to 95% (RH)